LNEYA, a laboratory fluid thermal cycler manufacturer, focuses on the production of various laboratory temperature control instruments and equipment. When users provide procurement requirements, product engineers will provide selection and use instructions according to specific working conditions.
When purchasing a laboratory fluid heating and cooling circulator, in addition to the model, attention should be paid to its cleaning and maintenance to avoid hindering the normal operation of the laboratory fluid heating and cooling circulator.
In terms of the selection of laboratory fluid heating and cooling circulators, the cooling capacity is one of its core metrics. However, there are many laboratory fluid heat and cold circulators at different temperatures. Different brands and methods of use are different. The temperature from the water outlet to the water inlet is different.
It is necessary to slowly cool the solution in the laboratory fluid heating and cooling circulator. If the evaporation temperature also begins to decrease, we can see if the height of the evaporated solution changes again. If the temperature does not change, the height of the general solution will not change, so as to judge the temperature stability of the laboratory fluid heating and cooling circulator.
During operation, it is necessary to always pay attention to the change of the internal temperature and keep it within the set range. Once the allowable temperature is exceeded, it is an abnormal situation, and the maintenance part must be guaranteed in time to eliminate the fault as soon as possible.
After using for a period of time, the fuel tank needs to be cleaned regularly, because the bottom of it will generate moisture, which will damage the cooling coil. The oil in the laboratory fluid heating and cooling circulator should also maintain a certain degree of cleanliness, and the filter should also be cleaned and inspected regularly to avoid debris and dirt residue.
Users usually attach great importance to the maintenance of laboratory fluid heating and cooling circulator. Generally, it is stipulated that when the machine is turned on, because it cannot be turned on for a long time, it will cause great damage to the internal parts of the laboratory fluid heating and cooling circulator, thereby affecting the normal operation of the machine.
Laboratory fluid heating and cooling circulator manufacturers provide a dedicated after-sales service team, users can contact our after-sales personnel to solve problems encountered in the process of using the equipment.