Some pharmaceutical low-temperature temperature control units feel that the cooling effect is not very good after they are installed at the beginning, or they feel that the cooling effect is not good after running for a period of time. At this time, how to solve the problem should be discussed separately. If you find that this effect is not good just after installation, there may be some problems with the equipment when it leaves the factory. You should contact the manufacturer immediately.
The temperature of the pharmaceutical low temperature temperature control unit does not decrease, and it has been in a state of little change. There may be minor problems with the installation of the cooling tower, circulating water pump, and pipeline during installation. Then check carefully according to the installation diagram to see if it is correct Caused by this aspect. The temperature does not decrease, and it may be that the thick impurities attached to the pipes affect the flow of water. If maintenance is not carried out regularly, it is easy to cause very serious dust accumulation in the internal parts of the refrigeration unit, heat cannot be effectively removed, and the equipment is in a long time. In high-load operation, the natural cooling effect is not as good as before.
There are many reasons for the poor cooling effect of the pharmaceutical low temperature temperature control unit, and a considerable part of the reason is that the refrigeration unit has not been regularly maintained.
Therefore, in order to make the pharmaceutical low-temperature temperature control unit obtain a good cooling effect, it is natural to need regular maintenance. This work is mainly to remove and wash the dust screen regularly, clean the dust on the condenser of the chiller, regularly replace the circulating cooling water, and clean up. Work, and regularly require technicians to check, so as to ensure the cooling effect.
The temperature of the pharmaceutical low-temperature temperature control unit does not decrease, and there may be problems with its own quality, and the type may be incorrect. If this problem occurs after six months or one year of use, it may be that the refrigerant is missing and needs to be added in time .